New England Arbors VA42055 Bedienerhandbuch PDF herunterladen (Seite 10)

134 in.

340.4 cm.

Vinyl Beam Assembly

www.edenarbors.com

Insert one 2x6x12 pressure treated wood into a beam section

followed by the joiner and another beam section.

Critical Note:

Note the location of the pre-drilled holes on beams. As pictured

aside, the further distanced holes need to mate together inside

the beam joiner. this is critical to ensure equal spacing of your

rafters.

Install the rafter brackets to the main beams using 5/8”

screws. Only attach four brackets to the beam as shown.

Follow the

pre-drilled holes to identify locations.

Screw the joiner to vinyl beams and wood insert using 1 1/2”

screws.

Repeat steps 1 to 3 for second beam.

STEP F OUR

12 x 12 Flat Top Pergola

At this stage, the columns should be properly

installed as per the following illustration,

with the columns 134” in. (340.4 cm) apart.

Also, notice that the holes at the top of each

post should be facing the same direction.

134 in.

340.4 cm.

Four holes

facing up

Pre-drilled holes

on the top

4.75”

11.5”

4.75”

Distance to first hole

*)Only attach four brackets to the

beam. ( two on each side of the

joiner)

1 2 ... 5 6 7 8 9 10 11 12 13 14

Keine Kommentare

New England Arbors VA42055 Bedienerhandbuch Seite 10